Pressure Blaster

Rust proof finish body

• Excellent service time
  
• High efficiency with longer running time
  
• User friendly interface

Pressure blaster mainly works on the direct pressure principle of blasting. In Pressure Blaster Machines air line from the compressor is connected to the directly to the pressure pot. When compressed air flows through the system, it will pressurize pressure pot tank and force media to fall downwards. When this media combines with a large volume of high pressure air, it will travel the length of the blast hose and comes out of the nozzle at high pressure. This high pressure stream of abrasive material strikes against the surface of the component to smooth a rough surface, roughen a smooth surface, shape a surface, or remove surface contaminants.

In this type of machines a cabinet type enclosure is provided, so that blasting operation must be conducted inside this enclosure and it will remain isolated to minimize worker exposure to air contaminants generated by the process.

APPLICATION OF THE PRESSURE BLASTER- 

• Rust and heat scale removal
• Paint stripping
• Surface texturing
• Reparation for painting, bonding and plating
• Corrosion removal
• Deburring, deflashing
• Fast Cleaning Rate
• Cosmetic finishing

ADVANTAGES -

• Very wide variety of blast media available
• Deeply cleans irregular surfaces
• Eliminates the need to use nasty chemicals
• Leaves a very attractive finish on most metals
• Provides an excellent surface for bonding & Plating